Astm A517 Grade E Steel Plate A517 Hot Rolled Steel Sheet Astm A517 High Strength Steel Plate
The ASTM A517 specification is the Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered material used in the application of fusion welded boilers and pressure vessels.
A517 Grade E steel plate. A517 Grade E is a high strength quenched and tempered alloy steel platesintended for use in fusion welded boilers and other pressure vessels.
A517 grade E Chemical Composition Max (%)
| Grade | C | Si | Mn | P | S |
| A517 grade E | 0.10-0.22 | 0.08-0.45 | 0.35-0.78 | 0.035 | 0.035 |
| Cr | Mo | B | Ti | V |
| 1.34-2.06 | 0.36-0.64 | 0.001-0.005 | 0.005-0.11 | |
A517 grade E Mechanical Property
| Grade | Thickness | Yield | Tensile | Elongation |
| A517 grade E | mm | Min Mpa | Mpa | Min % |
| 6-65 | 690 | 795-930 | 16% |
| 65-150 | 620 | 725-930 | 14% |
1 .can cut the large steel plates by your requirements
2 .can make the surface of the cut steel plate to be bright by miling and grinding
3 .can make holes and make angle degrees,and can weld by your drawing.
For the thickness under 30mm, we mainly cut by laser cutting;for thickness over 30mm, mainly OXY-cut, flame cutting.for the thickness 200mm steel plate, because during the flame cutting, the temperature is very high, so the cutting parts steel plate might be broken at the angle part, then our workers will repair the angles to be good condition.
Our Advantage
1. Certificates: ISO, API, BIS, TUV, ABS, BV, LR, DNV GL, CCS, RMRS, RINA, etc.
2. Third Party Inspection: SGS, BV, Intertek; ABS,LR, DNV GL, NK, CCS, RMRS, RINA, KR.
3. Available Test: UT, MT, Impact Test, PWHT, etc.
4. Specification limit is matchless in China even in the World, typical examples:
The Min. thickness for shipbuilding steel plates are 3mm.
The Min. thickness for hot rolled steel plates are 0.6mm.
The Max. width for pressure vessel steel plates: exceeds 5000mm.
5. Lifetime warranty: Gnee steel ensure to return and replace the steel products for free in its lifetime due to quality issues.
FAQ
Q: Are you manufacturer or trader?
A:Gnee steel is steel plate manufacturer. We also has warehouse near Tianjin and Shanghai port.
Q: Can you provide EN10204 3.2 MTC?
A: Yes.
Q: Can we get sample?Any charges?
A: Yes,you can get available samples in our stock. Free for real samples, but customers need to pay the freight cost.
Q: How can we get the offer?
A: Pease submit the required steel grade, size, quantity. And we will check price for you at the first time.
Q: What's your payment terms?
A: 30% down payment by T/T and 70% balance by T/T or L/C.
Q: What's your delivery time?
A: 15-45 days after receiving the down payment or L/C.
|
|
Astm A517 Grade E Steel Plate A517 Hot Rolled Steel Sheet Astm A517 Hot Rolled Steel Plates Images
|
